欢迎光临常州复诺纳米科技有限公司官网!
 
         

 
    

   
 
 
 
Everlube


Everlube730(EN)



Everlube730

MoS2/Graphite, Commercial Grade Solid Film Lubricant


Product Description

Everlube 730 is a commercial grade, thermally cured, MoS2/Graphite based solid film lubricant with an organic binder system. This coating provides an extremely low coefficient of friction, very good abrasion resistance, good wear life, and performs best in higher load carrying applications

Features / Benefits

•        Excellent coefficient of friction

•        Very good abrasion resistance

•        Good wear life

•        Ideal for higher load carrying applications

Markets

Typical Applications

•        Medical

•        Industrial Machinery & Equipment

•        Mechanical Components

•        Fasteners

•        Actuator stems and shafts

•        Gears, splines and cams

•        Bearings surfaces and tracks

•        Virtually all fasteners

Physical Properties

Lubricating Solids Binder

Color and Appearance* Carrier

Solids (by weight)*

Density*

Flash Point

Volatile Organic Compound Theoretical Coverage1 Alternative or Repair Coatings

MoS2, Graphite Organic

Gray/Black Matte Finish Solvent based 35% to 39%

9.2 土 0.5 lb/gal (1102 土 60 grams/liter)

38°F (3°C)

695 grams/liter (5.8 lb/gal)

545 ft2/gal @ 0.5 mils (13.3 m2/liter @ 12.7 microns)

A low VOC alternative coating for Everlube 730 is our Everlube 9001. For touch-up applications, Lubri-Bond A works well with Everlube 730..

Processing Information

Dry Film Thickness Dilution / Cleanup Solvent Dilution Ration (for spray)

Cure Cycle

Suggested Pretreatment Suggested Application Method

0.2 to 1 mils (5 to 25 microns)

600 Solvent or 50/50 ethyl alcohol and toluene 1:3 (product to solvent by volume) Adjust as needed. 1 hr@300°F

Grit Blast and/or Phosphate Spray, Dip Spin

For additional information, please see Processing Bulleting #3000-A

 

(Continued)


Everlube 730 Page 2 of 2


Typical Functional Properties


Corrosion Resistance

ASTM Test Method

Value

Test Panel

ASTM B117

48 to 72 hrs @ 5% neutral salt spray

Test Panel Coating Method

 

0.8 mil on grit blasted steel panel

Abrasion Resistance

ASTM D4060

Good

Coefficient of Friction

ASTM D2714

0.02 to 0.04

Operating Temperature Range

 

-100° to 375° F (-73 to 191 °C)

Load Carrying Capacity

ASTM 2625, Method B

<100,000 psi

Wear Life

ASTM 2625, Method A

>120 minutes

Chemical Resistance (ASTM D-2510, Method C)


Isopropyl Alcohol or Ethyl Alcohol

Pass

Diethanolamine

Pass

Mineral Spirits or Paint Thinner

Pass

Hydrochloric Acid (10%)

Pass

Toluene

Pass

Sodium Hydroxide (10%)

Pass

Acetone

Pass

Distilled Water

Pass

Skydrol 500 (room temperature)

Pass

Jet Fuels (JP-4)

Pass

Hydraulic Fluids

Pass

Trichloroethylene

Pass

Anti-Icing Fluids

Pass

 

 

Note: Chemical resistance may vary depending on the cure cycle. N/R = Not recommended Additional Information


Shelf Life and Storage:

One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.


Packaging:

Everlube 730 is available in gallons, 5-gallon pails, and quarts Warranty:

No representation of warranty is expressed or implied and all warranties including warranties of marketability and fitness for use are expressly disclaimed. Nothing herein shall be construed as permission or recommendation to practice a patented invention without a license.


* These tests are performed on each production lot

1 Based on 100% transfer efficiency at a dry film thickness of 0.0005 inch (12.5 microns).


分享到:


联系我们
常州复诺纳米科技有限公司
地址:江苏省常州市武进区常武中路801号
电话:0519-88709957
手机:13813588407
电邮:1948751975@qq.com


版权信息