欢迎光临常州复诺纳米科技有限公司官网!
 
         

 
    

   
 
 
 
Everlube


Everlube626(EN)



 

Technical Data

 

Everlube® 626

MoS2 Solid Film Lubricant

 

Product Description

Everlube 626 is a thermally cured MoS2 based solid film lubricant which utilizes a high molecular weight phenolic binder system. This coating provides excellent abrasion resistance, very good chemical resistance, and good wear life. Everlube 626 offers exceptional performance properties and contains no antimony or lead compounds. Specifications for this product can be found at: http://www.everlubeproducts.com/products

Features / Benefits

•        Excellent abrasion resistance

•        Very good corrosion resistance

•        Good wear life

•        Ideal for higher load carrying applications

Markets

Typical Applications

•        Aerospace/Defense

•        Chemical Processing

•        Mechanical Components

•        Industrial Machinery

•        Bearings, gears, splines and cams

•        Seals, clamps and couplings

•        Threaded connectors and disconnects

•        Firearm components

Physical Properties

Lubricating Solids:

Binder:

Color and Appearance:*

Carrier:

Solids (by weight):*

Density:*

Flash Point:

Volatile Organic Compound: Theoretical Coverage:1 Alternative or Repair Coatings:

MoS2

High molecular weight phenolic Flat black/gray finish Solvent borne 26% to 30%

8.2 ± 0.5 lb/gal (0 ± 60 grams/liter)

24°F (-40C)

756 grams/liter (6.3 lb/gal)

423 ft2/gal @ 0.5 mils (10.3 m2/liter @ 12.7 microns) Air dry alternatives for Everlube 626 is Lubri-Bond K

Processing Information

Dry Film Thickness Dilution/Cleanup Solvent: Dilution Ratio for Spray:

Cure Cycle:

Suggested Pretreatment: Suggested application Methods:

0.2 to 0.5 mils (5 to 13 microns)

MEK or 50% Ethyl Alcohol and 50% Toluene (preblended) 1:3 (product to solvent by volume) adjust as needed 1 hr. @ 300°F ± 15°F (149°C ± 10°C) (part metal temp) Grit blast and/or phosphate Dip spin, spray


 

Typical Functional Properties


Corrosion Resistance Test Panel

Test Panel Coating Method Abrasion Resistance Coefficient of Friction Operating Temperature Range Load Carrying Capacity*

Wear Life*


ASTM Test Method

ASTM B-117

ASTM D-4060 ASTM D-2714

ASTM 2625, Method B ASTM 2625, Method A


Value

>100 hrs. @ 5% Neutral Salt Spray 0.5 mil on grit blasted steel panel Good .04 to .06

-365° to 300°F (-221° to 149°C) >250,000 psi <120 minutes


Chemical Resistance (ASTM D-2510, Method C)


Isopropyl Alcohol or Ethyl Alcohol

Pass

Diethanolamine

Pass

Mineral Spirits or Paint Thinner

Pass

Hydrochloric Acid (10%)

Pass

Toluene

Pass

Sodium Hydroxide (10%)

Pass

Acetone

Pass

Distilled Water

Pass

Skydrol 500

N/R

Jet Fuels (JP-4)

Pass

Hydraulic Fluids

Pass

Trichloroethylene

Pass

Anti-Icing Fluids

Pass

 

 

Note: Chemical resistance may vary depending on the cure cycle. N/R = not recommended

Additional Information

Shelf Life and Storage:

One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above

Packaging: Everlube 626 is available is gallon, 5-gallon pail, and quart Warranty:

No representation or warranty is expressed or implied and all warranties including warranties of marketability and fitness for use are expressly disclaimed. Nothing herein shall be construed as permission or recommendation to practice a patented invention without a license.


分享到:


联系我们
常州复诺纳米科技有限公司
地址:江苏省常州市武进区常武中路801号
电话:0519-88709957
手机:13813588407
电邮:1948751975@qq.com


版权信息