欢迎光临常州复诺纳米科技有限公司官网!
 
         

 
    

   
 
 
 
Everlube


Everlube622(EN)



 

Technical Data

Everlube® 622

Graphite, Solid Film Lubricant
Product Description


Everlube 622 is a thermally cured bonded solid film lubricant containing graphite and other lubricant additives in a high molecular weight binder system. Everlube 622 was formulated specifically for fasteners to provide enhanced torque-tension properties, corrosion resistance and good durability for severe industrial environments. Everlube 622 is formulated without heavy metals any or toxic materials commonly found in conventional lubricant coatings.


Features / Benefits

Extremely Low Coefficient of Friction

Excellent Torque-Tension Properties

Good Wear Life

Good Chemical Resistance

Markets

 

Typical Applications

Power Industry

Medical

Mechanical Components

Industrial Machinery & Equipment

 

Fasteners

Valve components

Screw actuators

Seals, clamps, and couplings

Physical Properties


Lubricating Solid:

Binder:

Color and Appearance:* Carrier:

Solids (by weight):*

Density:*

Flash Point:

Volatile Organic Compound: Theoretical Coverage:1 Alternative or Repair Coatings:


Graphite and other lubricating additives High Molecular Weight Phenolic Olive Gray Matte Finish Solvent Borne 22% to 26%

7.6 ± 0.5 lb/gal (911 ± 60 grams/liter)

24°F (-4°C)

694 grams/liter (5.79 lb/gal)

436 ft2/gal @ 0.5 mils (10.6 m2/liter @ 12.7 microns)

Lubri-Bond 104 and Perma-Slik RGAC may be suitable touch-up and repair coatings for Everlube 622.


 

Dry Film Thickness Dilution / Cleanup Solvent:2 Dilution Ratio:

Cure Cycle:2 Suggested Pretreatment:


0.2 to 0.5 mils (5 to 13 microns)

600 Solvent or 50/50 ethyl alcohol and toulene, MEK Neat to 1:1 (Product to Solvent) by volume

1 hr. @ 300° F +/- 50° F Grit Blast and/or Phosphate


Suggested Application Methods:                                                                     Dip       Spin                   0

Spray 0



ASTM Test Method


Corrosion Resistance

Test Panel

Test Panel Coating Method Abrasion Resistance Coefficient of Friction Operating Temperature Range Load Carrying Capacity Wear Life Film Adhesion


ASTM

B117

ASTM

D4060

ASTM

D2714

ASTM

D-2714

ASTM

D-2714

ASTM

D-2510

Method B Method A Method A


Value

< 500 hrs. @ 5% Neutral Salt Spray 0.8 mil on grit blasted steel panel Good

0.02 - 0.04

-100。to 250°F (-73。to 121°C)

< 40,000 psi 30,000 cycles Pass



Isopropyl Alcohol or Ethyl Alcohol

Pass

Diethanolamine

Pass

Mineral Spirits or Paint Thinner

Pass

Hydrochloric Acid (10%)

Pass

Toluene

Pass

Sodium Hydroxide (10%)

Pass

Acetone

Pass

Distilled Water

Pass

Skydrol 500:

N/R

Jet Fuels (JP-4):

Pass

Hydraulic Fluids:

Pass

Trichloroethylene:

Pass

Anti-Icing Fluids:

Pass

Standard Test Fluid, TT-S-735, Type II3

Pass

Aviation Gas, MIL-G-5572, Grade 115/1453

Pass

Hydraulic Fluid, MIL-H-56063

Pass

Aircraft Lube Oil, MIL-L-6081 Grade 11003

Pass

Aircraft Turbine Oil, MIL-L-78083

Pass

H-D Lube Oil, MIL-L-2104, Grade 103

Pass

Non-Petroleum Hydraulic Fluid, MIL-H-84

Pass

Note: Chemical Resistance may vary depending on the cure cycle. N/R = Not Recommended


Shelf Life                     One year from date of shipment, stored in a factory sealed container between the

and                                           temperatures, 40。to 90°F. Coatings are thermally stable, but we do not recommend

Storage:                        prolonged exposure outside of the specified temperature range listed above.

Packaging:            Everlube® 622 is available in 5-Gallon Pail, Gallon, Pint, Quart


Warranty:                       No representation or warranty is expressed or implied and all warranties including warranties

of marketability and fitness for use are expressly disclaimed. Nothing herein shall be construed as permission or recommendation to practice a patented invention without a license.


 

 

分享到:


联系我们
常州复诺纳米科技有限公司
地址:江苏省常州市武进区常武中路801号
电话:0519-88709957
手机:13813588407
电邮:1948751975@qq.com


版权信息